-- Umqhubi wobhedu ofakwe etini, oqhotsiweyo, onamaqhina okanye ophethe i-tinsel.
--i-PVC okanye i-PE okanye i-PP insulation.
-- Ii-cores ezifakwe iintambo phantsi kwe-aluminium mylar shield.
--Intambo yokukhupha ubhedu efakwe ebhotileni.
--Ikhaka elilukiweyo lekopolo elifakwe ebhotileni okanye elingenanto.
--Ijekethi yePVC OKANYE ijekethi engafudukiyo iyafumaneka.
--Ubushushu obulinganisiweyo: 60℃.Umbane olinganisiweyo: 30Volts.
--Iphumelele uvavanyo lwe-UL VW-1 kunye ne-CSA FT1 oluthe nkqo.
--Ukudityaniswa kwentambo yangaphakathi kwiisekethe zeklasi yesi-2 zezixhobo ze-elektroniki okanye ukuhanjiswa kwedatha yomatshini womdlalo weTV.
| Uhlobo lwe-UL kunye nohlobo lwe-CSA | Iicores | Umqhubi | Ukuvala ubushushu Ubukhulu | Nom.Dia | Ucingo lokukhupha amanzi | Ikhaka elipheleleyo | Ubukhulu beJakethi | Kuko konke I-Dimeter | Umqhubi Ukumelana kwi-20℃ | ||
| I-AWG | Hayi/mm | Izinto eziphathekayo | I-Spiral I-braid | ||||||||
| mm | mm | HAYI./mm | mm | HAYI./HAYI.mm | mm | mm | Ω/KM | ||||
| UL2835I-CSA (Ixinene) | 4C | 28 | 7/0.127 | 0.22 | 0.82 | / | AL | 57/0.1 | 1.00 | 4.30 | ###### |
| 4C | 22 | 17/0.16 | 0.22 | 1.20 | 17/0.16 | AL | / | 0.45 | 4.00 | 59.40 | |
| 5C | 28 | 19/0.08 | 0.2 | 0.80 | / | IPHEPHA | 16/6/0.12 | 0.88 | 4.80 | ###### | |
| 6C | 28 | 7/0.127 | 0.22 | 0.82 | / | AL | 79/0.1 | 0.68 | 4.30 | ###### | |
| 7C | 28 | 7/0.127 | 0.26 | 0.90 | 7/0.127 | / | 75/0.12 | 0.90 | 5.00 | ###### | |
| 7C | 32 | I-TINSEL | 0.22 | 1.00 | 7/0.127 | / | 16/7/0.1 | 0.75 | 5.20 | ###### | |
| 8C | 28 | 19/0.08 | 0.23 | 0.86 | / | IPHEPHA | 16/8/0.1 | 0.75 | 4.80 | ###### | |
| 9C | 28 | 7/0.127 | 0.22 | 0.82 | / | IPHEPHA | 81/0.12 | 0.75 | 4.90 | ###### | |
| 10C | 28 | 7/0.127 | 0.26 | 0.90 | 7/0.127 | AL | / | 0.6 | 5.00 | ###### | |
